Reply to thread

The MPP should extend 4 3/4 inches or approx 120mm from the end of the barrel. This length includes the part that will be obscured by the front barrel mount. I first gave this number in post 4 of this thread.


Blaster - ESB EE3. Search for barrel mounts found parts discussion.


This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top