Reply to thread

Pm'd ya at the RPF site. I got the photo and that is one I've been working off of. All tolled there is only 4 pics of any use for this. Most are at the beginning of this thread too. If there were two black brackets the cylinders behind the silver stepped bracket would have to be shortened and that contradicts the other pics. As well The silver/white buttons/caps that are similar to the collar studs are elongated and go almost the length of the endcap. If there were another black bracket they would be bridging the endcap and bracket. That and there appears to be a white stripe on both sides of the endcap in the pic that we are discussing, what's up with that? Let me try to highlight and make some diagrams as well using the other pics in conjunction with yours. -Mark


This thread is more than 22 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top