Reply to thread

Message

Thanks for the kind words fett prop. Here are a couple other photos of the back which I prepped with a hand drawn stencil and the cheeks I had done but had problems with the masking tape as it pulled up some paint >.< lol. No worries though as I went back and re-painted the lower cheeks and dome with multiple coats .

[ATTACH=full]95187[/ATTACH]

[ATTACH=full]95188[/ATTACH]

I figured I'd do the mandibles<above> and then redo the upper cheeks by hand as described by RS in his tutorial. I've used Steve the Swede's ESB tutorial for help with the ideas for tracing <eyeballing it> and then applying the latex masking fluid.

Unfortunately I couldn't replicate the exact color on the back but I figured the green will take up atleast 2/3s of the back and I can fill in the rest of the tan with lark dark grey topically along with traces of silver and the light gray.

Thanks to RS, Marrow Sun, Evan, and Steve the Swede for some direct and indirect help on this project. Otherwise I wouldn't have come this far! :cheers

<blockquote data-quote="MacRory" data-source="post: 78785" data-attributes="member: 1260">Thanks for the kind words fett prop.&nbsp; Here are a couple other photos of the back which I prepped with a hand drawn stencil and the cheeks I had done but had problems with the masking tape as it pulled up some paint &gt;.&lt; lol.&nbsp; No worries though as I went back and re-painted the lower cheeks and dome with multiple coats .[ATTACH=full]95187[/ATTACH][ATTACH=full]95188[/ATTACH]I figured I&#039;d do the mandibles&lt;above&gt; and then redo the upper cheeks by hand as described by RS in his tutorial.&nbsp; I&#039;ve used Steve the Swede&#039;s ESB tutorial for help with the ideas for tracing &lt;eyeballing it&gt; and then applying the latex masking fluid.Unfortunately I couldn&#039;t replicate the exact color on the back but I figured the green will take up atleast 2/3s of the back and I can fill in the rest of the tan with lark dark grey topically along with traces of silver and the light gray.Thanks to RS, Marrow Sun, Evan, and Steve the Swede for some direct and indirect help on this project.&nbsp; Otherwise I wouldn&#039;t have come this far!&nbsp; :cheers</blockquote>

[QUOTE="MacRory, post: 78785, member: 1260"] Thanks for the kind words fett prop. Here are a couple other photos of the back which I prepped with a hand drawn stencil and the cheeks I had done but had problems with the masking tape as it pulled up some paint >.< lol. No worries though as I went back and re-painted the lower cheeks and dome with multiple coats . [ATTACH=full]95187[/ATTACH] [ATTACH=full]95188[/ATTACH] I figured I'd do the mandibles<above> and then redo the upper cheeks by hand as described by RS in his tutorial. I've used Steve the Swede's ESB tutorial for help with the ideas for tracing <eyeballing it> and then applying the latex masking fluid. Unfortunately I couldn't replicate the exact color on the back but I figured the green will take up atleast 2/3s of the back and I can fill in the rest of the tan with lark dark grey topically along with traces of silver and the light gray. Thanks to RS, Marrow Sun, Evan, and Steve the Swede for some direct and indirect help on this project. Otherwise I wouldn't have come this far! :cheers [/QUOTE]

This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification