Reply to thread

I have never done this before and have never heard of anyone doing this before.  Get a large picture of the armor.  Cut it out and glue it to a piece of cardboard.  Now cut the cardboard out so u have a picture of the individual armor pieces backed onto hard cardboard.  Now take a piece of poster board and place it on the wall.  Turn off all the lights and hold a light infront of the piece of poster board on the wall.  Now hold the backed picture infront of ur liht source and trace the shadow.  By moving the backed picture back and forth you will be able to make the size on the poster board larger and smaller.


This thread is more than 21 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top