Chest Armor Thickness

[TreppFett]

What would be the ideal thickness for Boba Fett chest armor?
I can get my hands on some 10-15mm material,I know its gonna be hard to cut and mabey a little hard to shape but Im thinking the thicknes may be ok.
Any opinions?

 

[Mullreel]

That is really thick. I have used 6mm and it is plenty thick to give a good look. Twice that thick may look weird. At 6mm you have to round the edges and give a return edge,........10- 15mm I would vote too thick

 

[TreppFett]

That is really thick. I have used 6mm and it is plenty thick to give a good look. Twice that thick may look weird. At 6mm you have to round the edges and give a return edge,........10- 15mm I would vote too thick

What do mean by return edge?
I could be wrong on the thickness I am only guessing as I only thought of this material just a few minutes ago.I will have to wait untilI get
to work in the morning to measure the actual thicknes.

 

[Mullreel]

The rounded portion of the edge. Without it the armor looks squared off and flat. If you take a look at Boba his armor is not sharp on the edges it rounds off.

 

[TreppFett]

The material is 6.3 mm thick it will work perfectly thanks for your input Mullreel

 

[Mullreel]

Here is some that I cut out of 6mm using WOF Jango templates

Uploaded with ImageShack.us


This was just after I had shaped them, and hit em witha coat of primer. If you look at the edges you can see what I am talking about as far as the rounded corner. I trimmed them with a knife and then sanded everything smooth.

Hope it works well for you.