Hi everyone first time poster here, so im building the girlfriend an ee3 out of metal and thought id share the build. its not fully to scale due to what i can buy in my town. anyhow this is what iv done so far.
used flat strap and solid square around a pipe.
welded the flat strap to the pipe.
made cut outs on the flat strap before welding.
welded the solid square to the flat strap.
made the tip from some 0.6mm sheet metal, a washer and bit of pipe.
all welded still needs a tidy up, metal was a bit to thin for my welder.
still needing a tidy up but front half of the barrel is nearly done.
will be doing some more tomorrow, intend on casting the flare gun part out of aluminum. let me know if anyone wants me to continue the build posts. can put all measurements up later if anyone wants them
used flat strap and solid square around a pipe.
welded the flat strap to the pipe.
made cut outs on the flat strap before welding.
welded the solid square to the flat strap.
made the tip from some 0.6mm sheet metal, a washer and bit of pipe.
all welded still needs a tidy up, metal was a bit to thin for my welder.
still needing a tidy up but front half of the barrel is nearly done.
will be doing some more tomorrow, intend on casting the flare gun part out of aluminum. let me know if anyone wants me to continue the build posts. can put all measurements up later if anyone wants them
Last edited by a moderator: