alexrep
New Hunter
Hey there, figured I'd get a progress thread going on the Supertrooper I hope to (one day) have finished to troop with 501st and the Mandalorian Mercs!
I already have this started over on the Teren Clan page, but figured i'd xpost it over here for publicity sake, and to maybe help out anyone else pursuing a fett that scratches way too easily and can NEVER eat spaghetti.
First thing I ended up doing was printing out files for the Sling Gun, they're excellent and made by Rafi over on TDH, here they are with a bit of sanding and priming out of the way already
More sanding, more painting.
I have since made the silver on the barrel look a lot less streaky.
After some shopping around and looking at various offerings around the interwebs I stumbled across an eBay auction for a cold-cast GMH helmet, so I jumped on it and ended up winning it!
It's a very pretty piece and has all of the calculator details built into it, saving some time and money.
I committed some sacrilege by bondo'ing in the Dent, im so sorry.
After that I did some more wet-sanding, and then went on to apply primer, sand that down (took forever), then applied my white-enamel paint with clear-coat!
Some more progress down on the helmet, still missing a visor, but I got the turn signales painted, borden connector painted, and put some foam in (with velcro) so the helmet is now wearable.
The very beginning of the printed parts of the Jetpack, took 7 hours at 0.3mm resolution
And here's a picture of the miscellaneous stuff I have so far, all of the ST Shin tools, Gaunlet Rocket, and the Sling Gun (as well as a scout trooper blaster I made up for my friend).
I noticed that the ST Gauntlet Flamethrower was unique to one used in any other movie, so i designed and printed one. it's about 1' long.
Ordered a Visor off eBay, so for now the helmet is done!
Printed the top of the left gauntlet, and I got some dental expanders and the MQ-1 keyboard from Utri!
Big mail day, lots of work to share!
got my MoW Flight suit, Gloves, and Belt today, as well as an ESB cape, ESB jumpsuit, gauntlet rocket and full set of armor (painted for ESB fett)!
Here's a pic of my right gauntlet with hinges attached and all
Left gauntlet on me (realized hinges were far too close together, very hard to get hand into, also all of the tubing was too long so I cut it down pretty heavily)
A few of my Jetpack pieces are finished as well
If anyone has any tips, tricks, comments, ideas, please share!
I already have this started over on the Teren Clan page, but figured i'd xpost it over here for publicity sake, and to maybe help out anyone else pursuing a fett that scratches way too easily and can NEVER eat spaghetti.
First thing I ended up doing was printing out files for the Sling Gun, they're excellent and made by Rafi over on TDH, here they are with a bit of sanding and priming out of the way already
More sanding, more painting.
I have since made the silver on the barrel look a lot less streaky.
After some shopping around and looking at various offerings around the interwebs I stumbled across an eBay auction for a cold-cast GMH helmet, so I jumped on it and ended up winning it!
It's a very pretty piece and has all of the calculator details built into it, saving some time and money.
I committed some sacrilege by bondo'ing in the Dent, im so sorry.
After that I did some more wet-sanding, and then went on to apply primer, sand that down (took forever), then applied my white-enamel paint with clear-coat!
Some more progress down on the helmet, still missing a visor, but I got the turn signales painted, borden connector painted, and put some foam in (with velcro) so the helmet is now wearable.
The very beginning of the printed parts of the Jetpack, took 7 hours at 0.3mm resolution
And here's a picture of the miscellaneous stuff I have so far, all of the ST Shin tools, Gaunlet Rocket, and the Sling Gun (as well as a scout trooper blaster I made up for my friend).
I noticed that the ST Gauntlet Flamethrower was unique to one used in any other movie, so i designed and printed one. it's about 1' long.
Ordered a Visor off eBay, so for now the helmet is done!
Printed the top of the left gauntlet, and I got some dental expanders and the MQ-1 keyboard from Utri!
Big mail day, lots of work to share!
got my MoW Flight suit, Gloves, and Belt today, as well as an ESB cape, ESB jumpsuit, gauntlet rocket and full set of armor (painted for ESB fett)!
Here's a pic of my right gauntlet with hinges attached and all
Left gauntlet on me (realized hinges were far too close together, very hard to get hand into, also all of the tubing was too long so I cut it down pretty heavily)
A few of my Jetpack pieces are finished as well
If anyone has any tips, tricks, comments, ideas, please share!