Page 1 of 3 123 LastLast
Subscribe
  1. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    Jul 15, 2005, 2:02 PM - UPDATED PRINTABLE JANGO ARMOR TEMPLATES #1

    Hello,

    Well, I finally finished converting my Jango Fett Armor CAD files into standard GIF images. What a bear, there are over 120 sheets that make up the various sizes I thought I never get through them all. Also if your and X-Large the Boba Fett X-Large templates are now also online as well. These, like Boba’s will print out on standard 8 ½” X 11” paper except for a few of the X-Large sheets. They come in four basic sizes, and I have included scaling factors to cover folks from 5’3” to 6’3”. For those over 6’3” you can use the X-Large templates with scaling factors of over 200%, but you will have to print out the templates out on additional sheets.

    Each Zip file contains 31 files. The armor files consist of 29 8 ½” X 11” pages and 1 layout drawing, some of the armor pieces have to be printed out on multiple sheets and then spliced together. I have included witness marks on these sheets to facilitate matching up the pieces. These files are nearly 1.5 MB each, so in an effort to conserve bandwidth these files are not full size they will need to be printed at 200% or you can use the “Fit To Page” print option. The one issue with the X-Large templates is that there are 6 sheets that require legal size (8.5” X 14”) paper. So you will have to set up your printer to handle legal size.

    The 31st file is a printer test page that contains a 5” scale in both the horizontal and vertical, I’d recommend printing this page before attempting to print the templates to verify that your printer will not distort them. Just print it out and measure both scales they should equal 5” each, if not then check your printer options please contact me if you have problem and I’ll see what I can do.

    One other thing I should point out is that these templates are based on idealized human proportions, unfortunately in reality there is no such thing, but with the variety of sizes you should be able to mix and match the various pieces to make a custom fit. Myself for example, I’m 5’11” and I will need to use the X-Large upper body armor and medium for the legs. So don’t be afraid to experiment with the various sizes to achieve the prefect fit. Again if you have any questions please let me know and I help try to work them out.

    My bandwidth is limited and it won’t take long to exceed it, please be patient these templates will be online for some time. If there is anyone out there that would like to host the Boba and Jango Armor files please let me know as I am maxed out.

    If you have any questions or comments please let me know.

    Alan

    wizardofflight@comcast.net

    P.S. I am still working on the templates for the knee armor and gauntlets for both Boba and Jango and the arena jet pack.



    Template ZIP Files & Scaling Factors

    http://home.comcast.net/~wizardoffli...or_X_Large.zip
    X-Large Templates are designed for a 6’3” tall individual print at 200%.
    For 6’2” print the Large templates at 197.3%.
    For 6’1” print the Large templates at 194.7%.


    http://home.comcast.net/~wizardoffli...rmor_Large.zip
    Large Templates are designed for a 6’ tall individual print at 200%.
    For 5’11” print the Large templates at 197.2%.
    For 5’10” print the Large templates at 194.4%.


    http://home.comcast.net/~wizardoffli...mor_medium.zip
    Medium Templates are designed for a 5’9” tall individual print at 200%.
    For 5’8” print the Medium templates at 197.1%.
    For 5’7” print the Medium templates at 194.2%.


    http://home.comcast.net/~wizardoffli...rmor_Small.zip
    Small Templates are designed for a 5’6” tall individual print at 200%.
    For 5’5” print the Small templates at 197%.
    For 5’4” print the Small templates at 194%.
    For 5’3” print the Small templates at 191%.


    Last edited by wizardofflight; Jul 15, 2005 at 2:08 PM.
  2. Member Since
    Jul 2005
    Posts
    590
    Jul 15, 2005, 2:37 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #2

    Great templates. You Da man :thumbup :thumbup

    Thanks for posting them.

    Brian
  3. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    Jul 16, 2005, 1:47 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #3

    Thanks. Hopefully folks will find them helpful.

    Alan
  4. Member Since
    Jul 2005
    Posts
    590
    Jul 17, 2005, 7:19 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #4

    Bump.....


    Great templates.
  5. Jul 20, 2005, 7:30 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #5

    Just an idea...

    You could try setting up a free website at www.freewebs.com which would allow you to host the files out of your personal space. There is a transfer limit of 100mb per month but that should not be to much of a problem.

    Will
  6. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    Jul 21, 2005, 12:51 AM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #6

    I tried to set up a Freewebs site, they have a number of restriction and file size limitations. Some of the restrictions apparently are removed after a week. We'll have to wait and see.

    Alan
  7. jangofett76's Avatar
    Member Since
    Oct 2002
    Posts
    689
    Jul 23, 2005, 10:15 AM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #7

    Great templates.

    Do you have one for the knee armor?
  8. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    Jul 23, 2005, 9:34 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #8

    I'm working on them, stay tuned.

    Alan
  9. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    Dec 22, 2005, 4:30 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #9

    Bump - based on PM requests

    The right gauntlet blueprints have been posted.

    Alan
  10. The Sniffer is offline The Sniffer
    Jan 3, 2006, 1:54 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #10

    WizardofFlight! My friend!

    You have one-upped even the "Sniffer" himself with your precision. Everyone has a different body type and you have included most on a broad spectrum! Good job my friend!

    The Sniffer Abides
  11. patiam69's Avatar
    Member Since
    Dec 2003
    Posts
    424
    May 4, 2006, 11:40 AM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #11

    has anyone made the cod off these templates? please post a pic if so. please please please
  12. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    May 4, 2006, 11:55 AM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #12

    This thread has a great cod build up. The technique should work very well with these templates also.

    http://www.thedentedhelmet.com/showthread.php?t=12396

    Alan
  13. I helped at SDCC '08 Jango 5204's Avatar
    Member Since
    Nov 2005
    Posts
    1,376
    May 4, 2006, 12:11 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #13

    I made a cod of the templates. Made it out of paper and taped the curved edge around. Cut the curved edge off and transfered it to plastic. CA glued the plastic top to the curved piece and used body filler on the edge. Got the raised portion by countersinking a pop rivet on the raised piece and spacing it off the base with a couple of small pieces of plastic. Body filler on those edges and it's all done. Hope it helps















    Quote patiam69 said:
    has anyone made the cod off these templates? please post a pic if so. please please please
  14. Member Since
    May 2006
    Posts
    36
    May 16, 2006, 4:17 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #14

    I am soooo happy I used the search feature and found these! Thanks wizardofflight! Today, when I get home I start my long journey into Jango-hood.

    Robert.
  15. I helped at SDCC '08 MandalorFett's Avatar
    Member Since
    Nov 2005
    Posts
    2,738
    Sep 25, 2006, 4:22 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #15

    Bump, good stuff. Thanks Alan!


  16. Member Since
    Sep 2006
    Posts
    1
    Oct 4, 2006, 3:04 AM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #16

    These are working out great for me so far. Thanks for making them.But I'm stuck on the back armor plate. I know it's different than Boba's with the curve and all but I've never actually seen jango's. What does the curve look like? Is it concave? If so then how deep? I did a search and all I've come up with is that it's different.
  17. Oct 7, 2006, 11:13 AM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #17

    Can Anyone send me the armor templates the websites do not show up on my browser.
  18. wizardofflight's Avatar
    Member Since
    Nov 2004
    Posts
    991
    Oct 7, 2006, 2:01 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #18

    Don't understand what's up but pm sent let me know what you need and I'll get them right out to you.

    Alan
  19. Oct 25, 2006, 4:08 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #19

    knee armor is missing from the templates.

    Any updates lately WOF?

    Do you have the flat layouts done yet for the gauntlets? even if you have the measurements laid out it would be a start!

    Metal takes longer to layout than fiuberglass! But it last longer!

    DM
  20. MandoMan's Avatar
    Member Since
    Aug 2005
    Posts
    837
    Oct 25, 2006, 4:13 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #20

    WOF's knee templates are in a separate thread:

    http://www.thedentedhelmet.com/showthread.php?t=9814
  21. KaanE is offline KaanE
    Nov 10, 2006, 1:23 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #21

    Your templates are brilliant, a few perfect pieces are going to go out for me. Thank you very much
  22. goldenrod's Avatar
    Member Since
    Nov 2005
    Posts
    456
    Nov 10, 2006, 2:41 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #22

    These are excellent!
    BTW mandoman your avatar is hilarious!
  23. I helped at SDCC '08 GCNgamer128's Avatar
    Member Since
    Jan 2006
    Posts
    5,520
    Dec 24, 2006, 4:51 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #23

    Bump for Alan.
  24. Member Since
    Aug 2007
    Posts
    53
    Sep 1, 2007, 8:21 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #24

    Quote wizardofflight said: View Post
    These files are nearly 1.5 MB each, so in an effort to conserve bandwidth these files are not full size they will need to be printed at 200% or you can use the “Fit To Page” print option.
    i tried the fit to page option, but they came out too small (i used the medium templates), so i tried the large templates, but they printed out the same size as the medium ones. i couldn't find anything that said i could print at 200%. please can anybody help?

    thanks

  25. Nov 6, 2007, 5:32 PM - Re: UPDATED PRINTABLE JANGO ARMOR TEMPLATES #25

    these look absolutely fantastic! i plan to make 1/8'' aluminum armor, and with your templates, i hope i can create some good armor! thank you so much for posting these for people such as myself to use!

Similar Threads

  1. UPDATED PRINTABLE ARMOR TEMPLATES - In various sizes
    By wizardofflight in forum Boba Fett Costume
    Replies: 186
    Last Post: 4 Hours Ago, 3:11 PM
  2. Jet Pack Templates ***NEW UPDATED***
    By LisaFett in forum Boba Fett Costume
    Replies: 73
    Last Post: Nov 14, 2012, 1:32 AM
  3. Jango Fett Knee Armor Templates/blueprints
    By wizardofflight in forum Jango Fett Costume
    Replies: 28
    Last Post: Mar 30, 2012, 4:34 PM
  4. Most Accurate Jango Armor Templates?
    By ACSS2 in forum Jango Fett Costume
    Replies: 17
    Last Post: Aug 22, 2010, 10:15 PM
  5. Question about the Jango Armor templates
    By bikerfett in forum Jango Fett Costume
    Replies: 0
    Last Post: Sep 15, 2008, 9:04 PM