UPDATED 6/25/08 Small Size Armor Added
Size from 5'-6" down to 3'-4"
Well, I finally got around to converting my Boba Fett Armor CAD files into standard GIF images that will print out on standard 8 ½ X 11 paper they come in three basic sizes, but I have included scaling factors to cover folks from 53 to 6. For those over 6 I will be working on an extra large version in the near future. For the time being you can try print the Large Templates at scaling factors of over 100%, but you will have to print out the templates out on additional sheets
Each Zip file is over 3 MB each, and they each contain 22 files. The armor files consist of 20 8 ½ X 11 pages and 1 layout drawing, some of the armor pieces have to be printed on multiple sheets and then spliced together. I have included witness marks on these sheets to facilitate matching up the pieces. These files are full size and do not require the Fit To Page print option, simple print at 100%.
The 22st file is a printer test page that contains a 5 scale in both the horizontal and vertical, Id recommend printing this page before attempting to print the templates to verify that your printer will not distort them. Just print it out and measure both scales they should equal 5 each, if not then check your printer options
My bandwidth is limited and with the size of these files it wont take long to exceed it, please be patient they will be online for some time
See the Jango section for downloadable Jango armor templates.
If you have any questions or comments please let me know