Reply to thread

I just did min last week.. I used an airbrush which I have 0 experience in.. What worked for me was keeping the flightsuit dry. Also for the paint, I poured paint thinner in a cup, then some paint, stirred them together, maybe a little bit of water, then poured it in the airbrush cup.. multiple coats/ colors.. black, charcoal, brown


Here's the first couple days of spraying.. if you look at the pouches.. you can barely see any there.. thats how it turned out when using a lot of water.. (I barely used any paint so thats partially why) the bottom is the second layer when wet.. Once it dries it fades a quite a bit..



[ATTACH=full]207543[/ATTACH]


Here's when I started when dry and a brown coat


[ATTACH=full]207544[/ATTACH]


Since then ive added another black layer.. but yea.. layers and dry flightsuit worked for me


This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top