Reply to thread

It continues to amaze me, how we buy something brand spanking new for our Boba Fett Build, then just dirty it up to look weathered and used.  Go Figure.


I got my Mojofett toe spikes in:

[ATTACH=full]139369[/ATTACH]


First thing I did, was grab my metal file and gave alittle scrub to help give a damaged looked to them

[ATTACH=full]139370[/ATTACH]


Next I used a combination of black, gray and crimson paint and spread around in the grooves to assist in the weathered look.

[ATTACH=full]139371[/ATTACH]


I then aligned the spikes on the soles, marked the hole and drilled a hole to fit in the lug nut.

[ATTACH=full]139372[/ATTACH]


Lastly, I put gorilla glue into the hole and E-6000 to secure the toe spike frame.

[ATTACH=full]139373[/ATTACH]


This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top