Reply to thread

Message

Thanks for the nice comments on our build.
   It was over three years ago when we started to put together ESB Boba.My son used TDH Cargo Hold to research the parts.I'm sure you're doing the same.
Checking back the basic help I can give you now is...
   Jet pack,Gauntlets,Boots,Cape- Man Of War
   Helmet- Fett Pride
   Suit,Vest,Neck Seal- Arkady
   Guns- Stormrider
   Some webbing and hardware- Strapworks
   Helmet electronics- Fettinator
   Armor,Wookie scalps,and waist belt- Our records show from Robert Howton,Little Rock,AR.Don't know if he's a member making them or just passed them on to us.
   Metal parts for the jet pack- Machine Craft
   Helmet dry transfers- Superjedi
We made our own molds for the Casio MQ-1 keypad(rather than cut up the original) and the clear piece for the flame thrower(used the MOW part for the mold) and then cast them ourselves.
   Gloves- Made them as well
Hope this helps...Some may have changed... If so, you'll find what you need on TDH...Best of luck.

<blockquote data-quote="Builder" data-source="post: 470831" data-attributes="member: 9056">Thanks for the nice comments on our build.&nbsp;&nbsp; It was over three years ago when we started to put together ESB Boba.My son used TDH Cargo Hold to research the parts.I&#039;m sure you&#039;re doing the same.Checking back the basic help I can give you now is...&nbsp;&nbsp; Jet pack,Gauntlets,Boots,Cape- Man Of War&nbsp;&nbsp; Helmet- Fett Pride&nbsp;&nbsp; Suit,Vest,Neck Seal- Arkady&nbsp;&nbsp; Guns- Stormrider&nbsp;&nbsp; Some webbing and hardware- Strapworks&nbsp;&nbsp; Helmet electronics- Fettinator&nbsp;&nbsp; Armor,Wookie scalps,and waist belt- Our records show from Robert Howton,Little Rock,AR.Don&#039;t know if he&#039;s a member making them or just passed them on to us.&nbsp;&nbsp; Metal parts for the jet pack- Machine Craft&nbsp;&nbsp; Helmet dry transfers- SuperjediWe made our own molds for the Casio MQ-1 keypad(rather than cut up the original) and the clear piece for the flame thrower(used the MOW part for the mold) and then cast them ourselves.&nbsp;&nbsp; Gloves- Made them as wellHope this helps...Some may have changed... If so, you&#039;ll find what you need on TDH...Best of luck.</blockquote>

[QUOTE="Builder, post: 470831, member: 9056"] Thanks for the nice comments on our build. It was over three years ago when we started to put together ESB Boba.My son used TDH Cargo Hold to research the parts.I'm sure you're doing the same. Checking back the basic help I can give you now is... Jet pack,Gauntlets,Boots,Cape- Man Of War Helmet- Fett Pride Suit,Vest,Neck Seal- Arkady Guns- Stormrider Some webbing and hardware- Strapworks Helmet electronics- Fettinator Armor,Wookie scalps,and waist belt- Our records show from Robert Howton,Little Rock,AR.Don't know if he's a member making them or just passed them on to us. Metal parts for the jet pack- Machine Craft Helmet dry transfers- Superjedi We made our own molds for the Casio MQ-1 keypad(rather than cut up the original) and the clear piece for the flame thrower(used the MOW part for the mold) and then cast them ourselves. Gloves- Made them as well Hope this helps...Some may have changed... If so, you'll find what you need on TDH...Best of luck. [/QUOTE]

This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification