Reply to thread

The armor you see in my first shots is acceptable, it is the same style as the Manadalorian Fire Commando https://swtor.jedipedia.net/en/npc/mandalorian-fire-commando I chose to use a heavier leg style to balance out the suit a bit. You can see more up to date pics and the body armor in progress here: Valkir's WIP Late Crusade armor (SWTOR based) 3D printed armor



This is another style that is completely acceptable https://swtor.jedipedia.net/en/npc/tiru as is this https://swtor.jedipedia.net/en/npc/mandalorian-tech-commando-2


If you wanted to go a bit lighter you could go this direction https://swtor.jedipedia.net/en/npc/mandalorian-warrior-7



If you go here https://swtor.jedipedia.net/en/search?q=mandalorian&patch=0 and scroll through the 'NPCS' section with any trooper that has the tag 'Mandalorian' it should be (likely will be) acceptable for a Late Crusade portrayal. but if you want to use it for the MMCC it is always best to check with the approval committee before you start a build.


This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top