Reply to thread

Message

Its all finished, very pleased with it, I may varnish the handle a bit more as the thing as whole is quite glossy looking...

[ATTACH=full]148202[/ATTACH]
its all in the details..

I could not make the little disc recess part on the left side without tooling, so I just used a cut off wheel from a grinder (nice and flat) and hit it with some silver and stuck it to the side, its not to bad I would like to think it had something there like this but just.....fell off :confused

[ATTACH=full]148203[/ATTACH]

a couple of pen lids and I think what you fellas in the states would all a ''cue tip'' ? you don't wanna know what we call them. and we have the little top greeblie.

[ATTACH=full]148204[/ATTACH]

combined with a bit of rail from left light saber project..

[ATTACH=full]148205[/ATTACH]

Stick it all on and we have a DL44

[ATTACH=full]148206[/ATTACH]
[ATTACH=full]148207[/ATTACH]
[ATTACH=full]148208[/ATTACH]
[ATTACH=full]148209[/ATTACH]
[ATTACH=full]148210[/ATTACH]
[ATTACH=full]148211[/ATTACH]

another project done with zero cost.. I really do love making things from nothing..

<blockquote data-quote="Silverstalker" data-source="post: 438848" data-attributes="member: 8116">Its all finished, very pleased with it, I may varnish the handle a bit more as the thing as whole is quite glossy looking...[ATTACH=full]148202[/ATTACH]its all in the details..I could not make the little disc recess part on the left side without tooling, so I just used a cut off wheel from a grinder (nice and flat) and hit it with some silver and stuck it to the side, its not to bad I would like to think it had something there like this but just.....fell off :confused[ATTACH=full]148203[/ATTACH]a couple of pen lids and I think what you fellas in the states would all a &#039;&#039;cue tip&#039;&#039; ? you don&#039;t wanna know what we call them. and we have the little top greeblie. [ATTACH=full]148204[/ATTACH]combined with a bit of rail from left light saber project..[ATTACH=full]148205[/ATTACH]Stick it all on and we have a DL44[ATTACH=full]148206[/ATTACH][ATTACH=full]148207[/ATTACH][ATTACH=full]148208[/ATTACH][ATTACH=full]148209[/ATTACH][ATTACH=full]148210[/ATTACH][ATTACH=full]148211[/ATTACH]another project done with zero cost.. I really do love making things from nothing.. <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":thumbsup:" title="Thumbs Up&nbsp; &nbsp; :thumbsup:"&nbsp; data-smilie="18"data-shortname=":thumbsup:" /></blockquote>

[QUOTE="Silverstalker, post: 438848, member: 8116"] Its all finished, very pleased with it, I may varnish the handle a bit more as the thing as whole is quite glossy looking... [ATTACH=full]148202[/ATTACH] its all in the details.. I could not make the little disc recess part on the left side without tooling, so I just used a cut off wheel from a grinder (nice and flat) and hit it with some silver and stuck it to the side, its not to bad I would like to think it had something there like this but just.....fell off :confused [ATTACH=full]148203[/ATTACH] a couple of pen lids and I think what you fellas in the states would all a ''cue tip'' ? you don't wanna know what we call them. and we have the little top greeblie. [ATTACH=full]148204[/ATTACH] combined with a bit of rail from left light saber project.. [ATTACH=full]148205[/ATTACH] Stick it all on and we have a DL44 [ATTACH=full]148206[/ATTACH] [ATTACH=full]148207[/ATTACH] [ATTACH=full]148208[/ATTACH] [ATTACH=full]148209[/ATTACH] [ATTACH=full]148210[/ATTACH] [ATTACH=full]148211[/ATTACH] another project done with zero cost.. I really do love making things from nothing.. :thumbsup: [/QUOTE]

This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification