Reply to thread

Got around to adding fans to my helmet.  This is the kit from Evil Boy.  The fans are pretty  quiet but there is a little hum but nothing too bad.  I would rather  have the air circulating.


I used double lock velcro for the battery pack to keep it in position  & an industrial velcro with "T" hooks that is used for hanging  things on imperfect surfaces.  Evil Boy does send velcro with the kit I  just opted for something I thought would be more secure.




These are all Rustoleum spray paints:


Deep Blue

Claret Wine misted with Colonial Red

Blossom White

Summer Squash misted with Striping Yellow

Metallic Aluminum

Dark Gray


Misted with Stone Gray, Dark Gray, & Flat Black for the weathering.


Finally mixed a custom reddish brown & a medium gray to use the air brush to give more it a dirtier look.  I painted the whole pack the Metallic Aluminum with a coat of dull coat for the base prior to painting.  The rest of the colors.  Masked off all of the damage with liquid masking.  These were the colors I thought looked good to me.  Hope this helps.


[ATTACH=full]42972[/ATTACH]


[ATTACH=full]42973[/ATTACH]


This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top