Reply to thread

Great! Thanks for the advice :) . I use latex rubber as well, but most of my airbrushing is either one solid color or weathering/damage. At the odd times that I need a sharp line, I either use good 'ol masking tape, or just hold a piece of cardboard against the line and shoot at an angle along the flat. I've never used frisket tape, but figured you'd know about it. Glad I asked. :)


This thread is more than 22 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top