Reply to thread

Message: <blockquote data-quote="CombatBaby" data-source="post: 61708" data-attributes="member: 906">Definately go with PVC! I'm assembling this as a prototype to make a positive from, but using PVC will give you a very sturdy construction for the tanks and it's cheap! You can get a 5 foot tube for no more than $4 at most hardware stores. I recommend Ace Hardware if you have one around you. 2 inch pipe should be the answer for the tanks. and for the other parts, these containers are perfect, a Quaker Oatmeal container for the main tank of the body, and a Bushes Baked Beans can for the top tank below the rocket and its base (yes the main tanks are definately different sizes)Hope that answers any questions you have for the tank construction-=QuinN!</blockquote>

This thread is more than 19 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification