Reply to thread

Hello,

 

Great looking Boba and pics.  As for the blaster, tk7602's method is the best way, but I would use at least a 1/4' threaded rod or a bolt with the head cut off.  The threads will give the glue something to grab onto.  I would also recomend using a slow cure epoxy, like the 24 hour stuff this should give you a really strong bond.

 

Good luck.

 

Alan


This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top