Reply to thread

Message

Made up a quick template for wrapping the box.

[ATTACH]62420[/ATTACH]
https://app.box.com/s/j5b0tejm572owp1a9amhovvk7bdraman

Printed it on card stock, cut it out and traced it on the vinyl, cut it out and glued it on to one of the boxes with some E6000.

[ATTACH]62421[/ATTACH]

I colored the edges that I thought could show with a black marker. I also made sure the top edges lined up with the top of the box.

[ATTACH]62422[/ATTACH]

That made the bottom a little bit longer, which is going to make those corners hide better later, as the vinyl wrapped around those corners just a little bit.

[QUOTE="boydell, post: 437847, member: 8853"] Made up a quick template for wrapping the box. [ATTACH]62420.vB[/ATTACH] [url]https://app.box.com/s/j5b0tejm572owp1a9amhovvk7bdraman[/url] Printed it on card stock, cut it out and traced it on the vinyl, cut it out and glued it on to one of the boxes with some E6000. [ATTACH]62421.vB[/ATTACH] I colored the edges that I thought could show with a black marker. I also made sure the top edges lined up with the top of the box. [ATTACH]62422.vB[/ATTACH] That made the bottom a little bit longer, which is going to make those corners hide better later, as the vinyl wrapped around those corners just a little bit. [/QUOTE]

This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification