Reply to thread

Message

Thanks for all your very kind words, I'm really flattered... This thing has been around 12 months in the making, it can be difficult to find the time whilst fulfilling other orders, doing other projects, work, family.... and I did get kind of worn down with it at one stage so I had to put it to one side for a month or two, then, with fresh eyes I got very enthusiastic again and voila... done!! The moulds will take me a few weeks to complete, they're pretty complex to build. In the meantime I will lathe out a beacon and stabiliser ready to mould. I will hopefully be able to make the little attachments that can be seen on the bottom of the jet pack these will be supplied with the final kit

I'm currently working on an adjustable harness design that can be supplied with the JP's.

I need to make a copy from the moulds to gauge how much time and materials it takes, but I estimate the cost to be around £230-£250 for the kit which will include the Resin Beacon, Stabiliser, small attachments and Adjustable Harness.

DAZ

<blockquote data-quote="bobamaker" data-source="post: 67599" data-attributes="member: 450">Thanks for all your very kind words, I&#039;m really flattered...<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" />&nbsp; This thing has been around 12 months in the making, it can be difficult to find the time whilst fulfilling other orders, doing other projects, work, family.... and I did get kind of worn down with it at one stage so I had to put it to one side for a month or two, then, with fresh eyes I got very enthusiastic again and voila... done!! The moulds will take me a few weeks to complete, they&#039;re pretty complex to build. In the meantime I will lathe out a beacon and stabiliser ready to mould. I will hopefully be able to make the little attachments that can be seen on the bottom of the jet pack these will be supplied with the final kit&nbsp;I&#039;m currently working on an adjustable harness design that can be supplied with the JP&#039;s.&nbsp;I need to make a copy from the moulds to gauge how much time and materials it takes, but I estimate the cost to be around £230-£250 for the kit which will include the Resin Beacon, Stabiliser, small attachments and Adjustable Harness.&nbsp;DAZ</blockquote>

[QUOTE="bobamaker, post: 67599, member: 450"] Thanks for all your very kind words, I'm really flattered...;) This thing has been around 12 months in the making, it can be difficult to find the time whilst fulfilling other orders, doing other projects, work, family.... and I did get kind of worn down with it at one stage so I had to put it to one side for a month or two, then, with fresh eyes I got very enthusiastic again and voila... done!! The moulds will take me a few weeks to complete, they're pretty complex to build. In the meantime I will lathe out a beacon and stabiliser ready to mould. I will hopefully be able to make the little attachments that can be seen on the bottom of the jet pack these will be supplied with the final kit I'm currently working on an adjustable harness design that can be supplied with the JP's. I need to make a copy from the moulds to gauge how much time and materials it takes, but I estimate the cost to be around £230-£250 for the kit which will include the Resin Beacon, Stabiliser, small attachments and Adjustable Harness. DAZ [/QUOTE]

This thread is more than 19 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification