Hello,
I am selling Litton Royal 242PD and 244PD keys. These are used for OT Boba's armor studs. The 242PD keys are believed to be the screen-used parts. The 244PD was made at the same time and by the same maker as the 242PD. The keys are nearly identical; they are only 0.3 millimeters smaller than the 242PD keys. I discuss more on the key in my build thread here:
242PD (Left) 244PD (RIght)
I have two sets of 242PD keys available. I also have a damaged set of 242PD kets. The plastic used to make the green keys is more brittle, which caused the stems to be damaged during extraction. However, this shouldn't affect the build, as you need to remove the stem anyway. So these are still perfectly usable. But since they are damaged, I will take a few bucks off.
For the 244PD keys, I will sell them for $2 each until I run out. You need six for an OT Boba build. While these may not be the exact keys as the 242PD, they are a step up from the ones that come with most kits and are cheaper than a metal stud kit.
Set of 6 242PD keys: $20 + $5 for shipping
Set of 6 242PD keys (4 Damaged): $15 + $5 for shipping
244PD keys: $2 per key + $5 for shipping
242PD Sets:
Damaged Set:
Shipping will be more for buyers outside the US.
If you have any questions, please let me know!
Happy New Year
Tom
I am selling Litton Royal 242PD and 244PD keys. These are used for OT Boba's armor studs. The 242PD keys are believed to be the screen-used parts. The 244PD was made at the same time and by the same maker as the 242PD. The keys are nearly identical; they are only 0.3 millimeters smaller than the 242PD keys. I discuss more on the key in my build thread here:
242PD v 244PD
After I received the 244PD by mistake, I ordered a 242PD to extract the correct keys for my build. But I have made an interesting discovery.
All you need to do is pull them up with a key-cap puller. I want to note that the green keys were brittle and the stems were damaged during extraction. Keep that in mind if you buy one of these. I didn't have this problem with the other keys.
So I theorized that the 244PD and 242PD keys were the same size; they just had different attachment methods. And, I was wrong. About .03 millimeters wrong. Here...
After I received the 244PD by mistake, I ordered a 242PD to extract the correct keys for my build. But I have made an interesting discovery.
All you need to do is pull them up with a key-cap puller. I want to note that the green keys were brittle and the stems were damaged during extraction. Keep that in mind if you buy one of these. I didn't have this problem with the other keys.
So I theorized that the 244PD and 242PD keys were the same size; they just had different attachment methods. And, I was wrong. About .03 millimeters wrong. Here...
242PD (Left) 244PD (RIght)
I have two sets of 242PD keys available. I also have a damaged set of 242PD kets. The plastic used to make the green keys is more brittle, which caused the stems to be damaged during extraction. However, this shouldn't affect the build, as you need to remove the stem anyway. So these are still perfectly usable. But since they are damaged, I will take a few bucks off.
For the 244PD keys, I will sell them for $2 each until I run out. You need six for an OT Boba build. While these may not be the exact keys as the 242PD, they are a step up from the ones that come with most kits and are cheaper than a metal stud kit.
Set of 6 242PD keys: $20 + $5 for shipping
Set of 6 242PD keys (4 Damaged): $15 + $5 for shipping
244PD keys: $2 per key + $5 for shipping
242PD Sets:
Damaged Set:
Shipping will be more for buyers outside the US.
If you have any questions, please let me know!
Happy New Year
Tom
Last edited:
