Reply to thread

What are the straps going to? If you put a frame inside and are going to strap to that you won't have a problem since all the weight will be beared by the frame.On my first jet pack when I used the "L" brackets to close up the back I used 3/16" aluminum pop rivets into the holes on my "L" brackets since the holes were a perfect 3/16".Seeing the rivet heads wasn't too bad considering with the frame,and rivets that thing was strong as heck. :) I wanted to avoid the same thing with the seam cracking under any pressure.


Steve


This thread is more than 22 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top