Reply to thread

I ended up using Rub'n Buff to get the stainless steel look on them. I initially tried using various silver metallic spray paints but nothing was quite shiny enough for me.


For the grips I used a medium gray, I can't remember the exact paint. I had a lighter gray initially which was more accurate but I like the contrast between the medium gray and chrome barrels so I switched to that. I then dry brushed metallic silver paint on the grips to give it a slightly metallic appearance.


 For the bronze areas I used FolkArt Metallic Bronze acrylic paint.


[ATTACH=full]246476[/ATTACH]

[ATTACH=full]246477[/ATTACH][ATTACH=full]246478[/ATTACH]


This thread is more than 3 months old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top