Reply to thread

Message

CONGRATULATIONS on finishing ! And to think, you only started over THREE TIMES! LOL !!

The only input I would have is: 1) The shoulder armor looks like it significantly hangs off of the vest. If you can possibly trim it down without making it look like they (armor) were made for a child, that would help. 2) The distance between the top of the Girth and the bottom of the ab plate looks a little more than normal; that could just be because you were moving alot though.

Just for reference, I found this GREAT FRONT/BACK pic on the 501st website. This is what I'll be using when I FINALLY start getting everything together and fitted. If I'm not mistaken, I THINK it might be TDH's own SEEKER!

[ATTACH]28536[/ATTACH]

Congratulations again. Great Job!!

<blockquote data-quote="OBrotherRacing" data-source="post: 314420" data-attributes="member: 4583">CONGRATULATIONS on finishing <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":thumbsup:" title="Thumbs Up&nbsp; &nbsp; :thumbsup:"&nbsp; data-smilie="18"data-shortname=":thumbsup:" />!&nbsp; And to think, you only started over THREE TIMES! LOL <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f606.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":lol:" title="Laugh&nbsp; &nbsp; :lol:"&nbsp; data-smilie="23"data-shortname=":lol:" />!!The only input I would have is:&nbsp; 1) The shoulder armor looks like it significantly hangs off of the vest.&nbsp; If you can possibly trim it down without making it look like they (armor) were made for a child, that would help.&nbsp; 2) The distance between the top of the Girth and the bottom of the ab plate looks a little more than normal; that could just be because you were moving alot though.Just for reference, I found this GREAT FRONT/BACK pic on the 501st website.&nbsp; This is what I&#039;ll be using when I FINALLY start getting everything together and fitted.&nbsp; If I&#039;m not mistaken, I THINK it might be TDH&#039;s own SEEKER![ATTACH]28536[/ATTACH]Congratulations again.&nbsp; Great Job!!</blockquote>

[QUOTE="OBrotherRacing, post: 314420, member: 4583"] CONGRATULATIONS on finishing :thumbsup:! And to think, you only started over THREE TIMES! LOL :lol:!! The only input I would have is: 1) The shoulder armor looks like it significantly hangs off of the vest. If you can possibly trim it down without making it look like they (armor) were made for a child, that would help. 2) The distance between the top of the Girth and the bottom of the ab plate looks a little more than normal; that could just be because you were moving alot though. Just for reference, I found this GREAT FRONT/BACK pic on the 501st website. This is what I'll be using when I FINALLY start getting everything together and fitted. If I'm not mistaken, I THINK it might be TDH's own SEEKER! [ATTACH]28536.vB[/ATTACH] Congratulations again. Great Job!! [/QUOTE]

This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification