Reply to thread

Message

Just a tip make shore your not spraying enamet over acrylic lacquer or even mixing brands canbe damaging if your not familior with the paints you should test spray on some thing like a bucket or something with a similer surface texture or even give the silver coat a light rub with 1200 grad wet dry aprasive paper best results when wet. good luck hope this helps

[QUOTE="BGHunter, post: 309022, member: 3986"] Just a tip make shore your not spraying enamet over acrylic lacquer or even mixing brands canbe damaging if your not familior with the paints you should test spray on some thing like a bucket or something with a similer surface texture or even give the silver coat a light rub with 1200 grad wet dry aprasive paper best results when wet. good luck hope this helps [/QUOTE]

This thread is more than 14 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification