Reply to thread

Hi Vode!

I apoligize to those people who have been viewing my thread but haven't recieved an update in a week.....well, here we go!

I spent the week sanding down my second coat of bondo on the dome of the helmet, and filling in the airbubles with a third coat, which was also sanded down. Once I got the shape I wanted, I just kept sanding and sanding to reduce as much weight as possible. Here is the third layer:

[ATTACH]48057[/ATTACH][ATTACH]48058[/ATTACH]

I also added bondo to the front (face) and back of the helmet. Here is only the first coat of bondo, but I added two more, and sanded those down as well to reach this stage:

[ATTACH]48059[/ATTACH]


That's it for today! that is all my progress. I still have some finalizing to do, but the helmet is 80% done in terms of body work.

thanks guys!

-Ghost


This thread is more than 10 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top