added a few things, changed some others, but here is the finished ee-3. Not 100 % screen accurate, but I like it and I built it, so that's the important thing. I would like some feedback, this being my first attempt.
The barrel strips are wood. Didn't have time to go searching for the correct pieces as I wanted to get this finished. The main barrel is PVC 2" circumfrence. The scope is a copper pipe cut down with two pieces taped to the end. The stock is wood. The chamber cover is made from hard plastic I cut from the template found here and molded with the blowtorch. The gun is a prop peacemaker that, until I added the chamber guard, functioned like a real peacemaker, sans ONLy the firing pin. The stock greeblies are pieces I had lying around from things I have taken apart and /or broken. After taping, sanding, painting, painting, painting and painting some more (a lot of work goes into making it look beat up, lol), I added a dull coat to it and while you cant see it in the webcam shots, there is a light misting of Krylon Espresso and Rust.
total weight is about 4 pounds. Total length is approx. 27 3/4"
