Reply to thread

Message

Hello,

Here you go, nothing fancy, but hopefully it will give you what you need. The 2nd page of the PDF will print full size when printed on standard 8.5” X 11” paper. The first page is just for reference, but I did include some basic dimensions to guide you.

Also I am convinced that the forward scope mount is attached to the flash tube so that is how I have drawn it up. I know that some believe that the mount is on the end of the barrel, but my research does not support this position. The point is that if you want to mount the front mount on the barrel you will have to revise both mounts to increase the diameter to allow them to fit on the barrel.

If you have any question please let me know.

Have a great day.

Alan

http://home.comcast.net/~wizardofflight/ESB_Scope_Mounts.pdf

<blockquote data-quote="wizardofflight" data-source="post: 79320" data-attributes="member: 576">Hello,&nbsp;Here you go, nothing fancy, but hopefully it will give you what you need.&nbsp; The 2nd page of the PDF will print full size when printed on standard 8.5” X 11” paper.&nbsp; The first page is just for reference, but I did include some basic dimensions to guide you.&nbsp; &nbsp;Also I am convinced that the forward scope mount is attached to the flash tube so that is how I have drawn it up.&nbsp; I know that some believe that the mount is on the end of the barrel, but my research does not support this position.&nbsp; The point is that if you want to mount the front mount on the barrel you will have to revise both mounts to increase the diameter to allow them to fit on the barrel.&nbsp;If you have any question please let me know.&nbsp;Have a great day.&nbsp;Alan &nbsp;<a href="http://home.comcast.net/~wizardofflight/ESB_Scope_Mounts.pdf" target="_blank">http://home.comcast.net/~wizardofflight/ESB_Scope_Mounts.pdf</a></blockquote>

[QUOTE="wizardofflight, post: 79320, member: 576"] Hello, Here you go, nothing fancy, but hopefully it will give you what you need. The 2nd page of the PDF will print full size when printed on standard 8.5” X 11” paper. The first page is just for reference, but I did include some basic dimensions to guide you. Also I am convinced that the forward scope mount is attached to the flash tube so that is how I have drawn it up. I know that some believe that the mount is on the end of the barrel, but my research does not support this position. The point is that if you want to mount the front mount on the barrel you will have to revise both mounts to increase the diameter to allow them to fit on the barrel. If you have any question please let me know. Have a great day. Alan [url]http://home.comcast.net/~wizardofflight/ESB_Scope_Mounts.pdf[/url] [/QUOTE]

This thread is more than 19 years old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification