So I caught myself wanting to switch gears here for a moment. And decided to work on the Boot Disc Greeblies a little. I was looking for a way to attach them to the Boot Gaiters/Spats that I got from Alvomedia. I opt'd to have them screwed in, but rather than have a drywall type screw in place I decided to be a bit more creative and wanted to Countersink/Embed in a #8 Hex Nut into the resin greeblie.
And so I began. I started out with my #10 Countersink bit with DeWalt 18v drill. The #8 Hex Nuts and some #8 test screws.
[ATTACH=full]221558[/ATTACH]
Boring the space out for the hex nuts and placing them was actually really, really easy.[ATTACH=full]221559[/ATTACH]
Next step is to very carefully go on the outside edges with some well placed JB Weld Plastic Bonder to ensure the hex nuts do not move when tightened. Then off to some painting the Boot Disc Greeblies and then fitting them to the Boot Gaiters/Spats, and then finally weathering the Boot Gaiter/Spats.