Reply to thread

I actually have both a gravity feed and a siphon feed.  I use the siphon one to put down base layers and some misting/shading depending on how much area I"m working with (think armor, backplate, jetpack) then use the gravity feed when doing detail work, battle damage, and weathering.  I have a pretty simple single action panache for the siphon one, works well for applying base layers.  I have an Itawa for the other but have really been thinking about getting one of these...  Grex Tritium.TG2, Top Gravity Airbrush, 0.2mm Nozzle  It has a .2mm tip and you can change out a .3mm and a .5mm.  It also has 3 paint cups that you can change depending on what size you need.


This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top