Hey everybody. I've found myself in a unique opportunity to use a 3D printer in this next month or two. I got to thinking about using it to "print" myself Boba's blaster (since I originally didn't intend on getting one due to having no money 
). While I'm working on an ROTJ suit (or SE depending on which paint job I do on the helmet), I figured I'd start modeling the ESB sidearm first since 1.) it's simpler in design thus easier for me to get my feet wet in working on this and 2.) the 3D printers can only go so big. The sidearm could be printed out in one large mass whereas the rifle would need to be broken up and assembled.
UPDATE 04/12/2013:
OK. Got the oval shape and set up everything so it should be ready to go!
[ATTACH]37185[/ATTACH] [ATTACH]37186[/ATTACH] [ATTACH]37187[/ATTACH]
Here is the printable STL file for those of you who want to print this out:
http://rapidshare.com/files/3540972282/04122013_Archaster777_ESB_Sidearm_PrintFile.stl
Now according to Maya it SHOULD be sized correctly but I would double check it to be sure. Let me know if there are any issues with the file and I will correct them as soon as possible!
[ATTACH=full]36933[/ATTACH]
[ATTACH=full]36934[/ATTACH]
[ATTACH=full]36935[/ATTACH]
[ATTACH=full]36936[/ATTACH]
[ATTACH=full]37032[/ATTACH]
[ATTACH=full]37033[/ATTACH]
[ATTACH=full]37034[/ATTACH]
[ATTACH=full]37035[/ATTACH]
