Reply to thread

Nope, as rafalfett said, as long as you are using 2mm thick cardboard it should already be the perfect thickness. The inner layer/outer layer together should be about 4mm thick and the cheeks will glue in flush with the top of the outer layer.


This thread is more than 9 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top