Recent content by Loufett

So after talking with Drtoothache I went ahead and ordered a new flight suit my current one is an Arkady which is amazing quality, but it is and has always seemed to be on the thicker side where as Jango flight suit always appeared to look thin almost like scrubs, but regardless I wanted to get...

So recently decided to repolish my armor mainly cause it wasn't as shiney. First use #0000 steel wool as usual to smooth out and get a slight shine maybe do 3 or 4 rounds while using cold water and keeping the piece wet, next dry the piece completely than grab a paper towel, yes a paper towel...

My vest is from Delta leather works lol it's cool haha and thanks man

Sorry guys been awhile and if you follow on Instagram you know I finished my Jango, but I'll go ahead and add pics of the finished project and some troop photos

Sprayed the blue and unfortunately when I sprayed the satin clear over the whole thing the blue and burgundy paint reacted and started crinkling, I went off prior write ups that said to use a Krylon satin clear coat (lacquer clear) but most the paints called to use in the write up are enamel and...

Once the white had cured for a full 24 hrs I went ahead and started masking off the the parts I wanted to keep white using Frog painters tape and then spray the yellow next which I used Krylon old equipment yellow keep in mind the white is a lacquer spray paint and the yellow is a Enamel so that...

For the jetpack here are my cura settings to save some of yall time and lessen the chances of a issue during a long print It maybe alittle too much on the safe side but I like to be able to set it and forget it and not some back to a fail, I bought and used minutefett's z-6 jetpack files. My...

After getting used to 3d printing and printing armor for my season 3 Axe woves, I decided to tackle the Z-6 jetpack since the Jango Kamino scenes were my favorite and ultimately my favorite look for jango. Getting there, just need to print the bottom halves.

3d printed the Westar blasters using stunt blaster files from Minutefett and printed them on my new printer. I am not happy with the shine on these and will probably redo the the sanding and use rub n buff

I figured I'd post my build thread from TheBHG here for those who may not be a member to see. I grew up watching the OT non stop and always loved the stormtroopers and their armor, and when the prequels came out especially episode 2 I became obsessed with Jango and remember making cheap little...

Where did you get the patches?

Still don't know how I feel about the alignment of the eyes/size.. what do yall think? Here's a mock up of the range finder and ear cap

So today I finished painting the pp1 cat scratch and damage around the cut on the dome as well as re painted the eyes for the second time.. they are still uneven but oh well..

So I knocked out alot of the painting on the front of the helmet this past weekend mainly Saturday. I got to basicly painting the eyes on but could not quite get them to my liking so I removed them with paint thinner and will repaint so the helmet sits now without eyes

Also along with the PP1 helmet I'm painting I will also attempt to make a somewhat accurate pp1 but since alot of information is not quite available I will do my own interpretation. I've noticed alot of parts from the PP1 and PP2 were carried over to ROTJ like knee pads, jetpack, cape, and etc