Prev
After building and reinforcing the inside I added a coat of white plastic primer. Was tempted to leave it white...:)
Next
Prev
After cleaning up all the excess, maybe too much cleaning. Initially I was going to use the inner harness from a combat helmet.
I did some reinforcing with foamex and epoxy putty (awesome stuff!) and went with a construction helmet inner.
I built up the inner mandibles with epoxy putty and countersunk some 4mm nuts in the putty for the visor.
After building and reinforcing the inside I added a coat of white plastic primer. Was tempted to leave it white...:)
I added a space for a voice changer, a mount for a battery and a slot for a small speaker. The slots for the helmet harness are pieces of the original construction helmet that where cut out and stuck on the inside, with a lot of measuring, glueing, pulling apart, measuring, re-glueing, glueing my hair to the helmet harness, just to get it fitting perfectly.
FH07
FH08
Next
Hames13

After building and reinforcing the inside I added a coat of white plastic primer. Was tempted to leave it white...:)

  • Media owner Hames13
  • Date added
There are no comments to display.


Write your reply...

Media information

Album
ESB Helmet 1
Added by
Hames13
Date added
View count
1,068
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Apple iPhone 5s
Aperture
ƒ/2.2
Focal length
4.2 mm
Exposure time
1/33 second(s)
ISO
200
Flash
Off, did not fire
Filename
FH05.jpg
File size
65.5 KB
Date taken
Fri, 27 November 2015 3:22 PM
Dimensions
600px x 600px

Share this media

Back
Top