SPY007
Active Hunter
I used WOF's templates on this build. The barrel is a black PVC pipe. I took a smaller white PVC pipe, cut a slit lengthwise and epoxied it inside. I then tapered the outer black pipe on a belt sander to give it a taper. The barrel tip is a sink tube. The scope mounts were made from a black PVC coupler and a black reducer. The rest is sheet plastic from a sign shop ABS, PVC not sure. The white is styrene. Plenty left to do. I used HO scale model train corrugated aluminum sheet over JB QUICk WELD to mold the thumb ridges at the rear of the barrel.
![ScopeMounts.jpg ScopeMounts.jpg](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41234-a466e8408c4c979d0dc6413c92b3bbba.jpg)
![Hammer.JPG Hammer.JPG](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41235-c15e725146c2c8a62383f5091f966df6.jpg)
![Webley1.JPG Webley1.JPG](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41236-3e1a7a59461006e2e3b1523f690701e0.jpg)
![Webley2.jpg Webley2.jpg](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41237-d6743e89b47cad411fefc6bd931ff50b.jpg)
The hand grip was cast in fiberglass. The stock was made from two 3/4 pieces of oak glued together, band sawed and wood rasped to shape. The sling was cut from a thrift store belt. Scope is made from 2 cheap scopes I found on ebay. So far this has been really cheap to make.
![ScopeMounts.jpg ScopeMounts.jpg](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41234-a466e8408c4c979d0dc6413c92b3bbba.jpg)
![Hammer.JPG Hammer.JPG](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41235-c15e725146c2c8a62383f5091f966df6.jpg)
![Webley1.JPG Webley1.JPG](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41236-3e1a7a59461006e2e3b1523f690701e0.jpg)
![Webley2.jpg Webley2.jpg](https://thedentedhelmet-f28a.kxcdn.com/forums/data/attachments/41/41237-d6743e89b47cad411fefc6bd931ff50b.jpg)
The hand grip was cast in fiberglass. The stock was made from two 3/4 pieces of oak glued together, band sawed and wood rasped to shape. The sling was cut from a thrift store belt. Scope is made from 2 cheap scopes I found on ebay. So far this has been really cheap to make.
Last edited by a moderator: