The temperature went up enough this afternoon that I thought I would take a chance casting the resin. It was a bit colder than it should be for casting, but the sun is shining brightly. I also used a tad more hardener to help the curing along.
I used a level to ensure the mold was sitting horizontally before pouring. The resin is gelled at this point, but I'm going to leave it overnight. I had good luck last time I left the casting in the mold for longer than usual so I'm going to try it again.
I used a level to ensure the mold was sitting horizontally before pouring. The resin is gelled at this point, but I'm going to leave it overnight. I had good luck last time I left the casting in the mold for longer than usual so I'm going to try it again.