teraxis
Hunter
I have been working on modding a 1995 Don post Boba helmet. I was originally going to just make it a custom mando helmet. I am mostly using It to test techniques of painting and use of my dremel tool ( I have some other posts showing some of the pics but I will toss some on here as well once I get a bit further along.) I have really been wanting to play with R&B and I just happen to have a tube of silver leaf laying around... This piece will mostly be a display piece since I have a large head and it is a small helmet. I have a few questions though if anyone can help me out.
1. Other than color and the Dent (I have already filled the dent in) what are the major differences between the Jango and Boba helmets?
***edit 10/5/13.
This is a link to my other thread. As my initial issues have been addressed I will continue my WIP on this post now. http://www.thedentedhelmet.com/f32/tips-cutting-out-keyholes-visors-48531/
Here is where I am at on this project!
Right cheek disk removed an sanded smooth
Rear view
Inside
I went with black primer so thar if the r&b gets scuffed it should just look like weathering.
These are the paints I believe I need am I correct
1. Other than color and the Dent (I have already filled the dent in) what are the major differences between the Jango and Boba helmets?
***edit 10/5/13.
This is a link to my other thread. As my initial issues have been addressed I will continue my WIP on this post now. http://www.thedentedhelmet.com/f32/tips-cutting-out-keyholes-visors-48531/
Here is where I am at on this project!
Right cheek disk removed an sanded smooth
Rear view
Inside
I went with black primer so thar if the r&b gets scuffed it should just look like weathering.
These are the paints I believe I need am I correct
Last edited by a moderator: