Thanks again for the feedback guys, I'm on the home stretch now.
I have added 5 press studs to the Girth Belt & Flack Vest to keep them in place, looking good.
Now everything from the neck down is finished, just the Helmet to go.
I spent a couple hours masking the cheek curves for painting, but I'm concerned it will look rough when painted, so I did some research and have a new approach.
I have traced the curve of each cheek, and am going to cut the shapes from adhesive vinyl. The hard part is to then position the vinyl exactly in the right position, and I now know how! The trick is to wet the cheeks with soapy water, this allows the vinyl to slide a little when positioning, then when its in the desired position, use a small squeegee to remove the excess water & leave for a few hours to dry. I have had a practice & it looks like this will do the job.
There is one other item I'll be working on after the helmet is done, the new Man Of War Arena Jet Pack! I couldn't resist, I expect to receive it in the next week or so. I'll be putting my current JP in the Cargo Hold some time soon.
Cheers!