The tube bit between where the webley ends and the fins start is approx 3", the finned bit is approx 8" and the total length is just under 30.5" I scaled it off a bigger version of the pic below.
PM me for details etc.
SAS
Ripcode said:
How long is the blaster? Could you measure the entire length?
Also, could you measure the section of the barrel that has the t-tracks?
I'm curious to see if the this an accurate length.
The bomb rack greeblie is a known part. Once you know the size of that, you can scale the correct length of the entire blaster. I'm pretty sure the Sci-Fire, which I also have, is too short.
According to MR the length of the blaster is going to be 32 5/8 long.
i'll try to get a side by side shot of mine and the one in the case tomorrow. the scaling will be a bit off since it will be about 3" in front of the one in the case, but it should be easy enough to tell a difference of 2 inches at that distance.
Here's a quick (& crapy) layover. The green is the original blaster, & the blue is a sci-fire blaster. The length seems to be a little short, & on the original it looks as if the stock has been trimed down a bit.