fett uk
Active Hunter
I'm not very good at giving tutorials,but it was just a case of cut the card to the right shape and stick it together!
this is how I did it if it helps!!
The main body is made from one piece of plastic(sintra) and velcroed at the bottom, then all the card bits were taped and glued to it, i then painted the whole thing with gloss paint (to help waterproof, dosnt matter what colour) when dry i then painted the whole thing silver.
The darts are actually arrow heads (a mate is into archery) the rocket was a piece of plastic pipe wrapped in card with strips of card glued to it to add the ridges,I also mashed a calculater to get the rubber keypad and stuck pieces of thin aluminium plate to key parts to give a smooth metallic finish (it helps that I work at a printers, plenty of scrap aluminium)
Then put a bit of rubber glue on certain areas that i wanted to keep silver, sprayed the lot red, peeled of the glue, a quick squirt with silicone spray and wahey there you go - cardboard gauntlets!!!!
Fett-UK
this is how I did it if it helps!!
The main body is made from one piece of plastic(sintra) and velcroed at the bottom, then all the card bits were taped and glued to it, i then painted the whole thing with gloss paint (to help waterproof, dosnt matter what colour) when dry i then painted the whole thing silver.
The darts are actually arrow heads (a mate is into archery) the rocket was a piece of plastic pipe wrapped in card with strips of card glued to it to add the ridges,I also mashed a calculater to get the rubber keypad and stuck pieces of thin aluminium plate to key parts to give a smooth metallic finish (it helps that I work at a printers, plenty of scrap aluminium)
Then put a bit of rubber glue on certain areas that i wanted to keep silver, sprayed the lot red, peeled of the glue, a quick squirt with silicone spray and wahey there you go - cardboard gauntlets!!!!
Fett-UK
Last edited by a moderator: