"Turbo-Projected Magnetic Grappling Hook with 20-Meter Lanyard: Can use 100-meter-long cord. Which (inside launcher) lifts up to 100 kilograms. can replace with Anti-Vehicle roaming Missle.
"Rocket Thruster Fuel Tanks: Fuel tank holds enough fuel for one minute of continuous operation. (20 three-second blasts.) Each three-second blast moves Fett up to 100 meters [328 feet] horizontally or 70 [230 feet] meters vertically. Top speed of 145 kilometers per hour; maximum range of two kilometers.
"Directional Thrusters: Gyro-Stablizers apply conterthrust for maneuvers and landings." -The Essential Guide to Weapons and Technology
This is the backpack worn by Boba Fett. It is sometimes referred to as a rocket pack, but TDH has standardized on calling it "Jet Pack."
Boba Fett's jet pack remained pretty consistent throughout pre-production to film. The most notable difference between each jet pack would be the paint colors and weathering.
Other such differences include the placement of the greeblies seen on the Preproduction 1 to the inside seen in Preproduction 2.
A few more interesting things to note about the packs, which we will describe here.
There were 2 different styles of beacon used in the films, which seems to vary slightly from the Preproduction 1 jet pack. Take a look at this comparison of exhibit photos.
Note that the top appears to be brass, and that the size and shape differs between the MoM pack and the one seen in other exhibits.
Boba Fett Concepts Jet Pack
Super Trooper Boba Fett Jet Pack
Holiday Special Boba Fett Jet Pack
Preproduction 1 Boba Fett Jet Pack
The Preproducion #1 and Preproduction #3 Rocket Packs are the same pack.
The greeblies seen on the bottom consist of a BNC Female Chassis Mount Solder Connector, a XLR Male 3-Pin Chassis Mount and a XLR 5-Pin Female Chassis Socket Connector. The other two greeblies have not been positively identified, but are speculated to be a regulator pin and a gas related quick disconnect coupling.
The Rocket Pack Stabilizer (or Targeting Range Finder according to the Visual Dictionary) is the foot stand from a Michell Engineering Turntable Sweep Arm.
Preproduction 2 Boba Fett Jet Pack
The greeblies seen on the inside face consist of BNC Female Chassis Mount Solder Connector, a XLR Male 3-Pin Chassis Mount and a XLR 5-Pin Female Chassis Socket Connector. The other two greeblies have not been positively identified, but are speculated to be a Regulator Pin and a Quick Disconnect coupling.
The Jet Pack Stabilizer (or Targeting Range Finder according to the Visual Dictionary) is the foot stand from a Michell Engineering Turntable Sweep Arm.
Preproduction 3 Boba Fett Jet Pack
The Empire Strikes Back Boba Fett Jet Pack
Return of the Jedi Boba Fett Jet Pack
There are at least four identified jet packs used for Return of the Jedi. One jet pack is currently owned by Steve Sansweet, the Director of Content Management at ILM.
The Return of the jedi jet pack maintains the original concept seen in the pre-production versions. The jet pack is a fiberglass/resin construction with various foudn items, and painted using Floquil model train paints and Grumbacher Miskit Liquid Frisket for masking.
The only identified foudn items on the jet pack consists of the Stabilizer (or Targeting Range Finder according to the Visual Dictionary). The Stabilizer is the foot stand from a Michell Engineering Turntable Sweep Arm.
The jet pack is hooked onto a Harness that is worn under the Vest. The Harness has not been yet identified, but is another found item.
Special Edition Boba Fett Jet Pack
Boba Fett Touring Jet Pack
Boba Fett Stunt Jet Packs
This page has been seen 2,044 times.
Created by onLast updated by on