ROTJ Special Edition Promo

All right just got my ROTJ SE Ammo belt in. Delta Leather Works. Mike did a great job. He even added the 3 snaps on 3 pouches just like in the SE Promo shots. Time to do some weathering.
1289ADBF-303D-4C84-88DB-7BB53822A3DF.jpeg
 
I also finished hand sewing the black webbing straps and attaching my vintage U.S. Divers buckle on my BigDane harness. Just need to position and sew on the 1.5 in white straps and d rings. Those will have to be positioned with the flak vest and back armor.

A5839F08-607D-4078-9C18-E6F88D271FE2.jpeg
 
Made some big progress. I did some initial fit up and sent my flight suit to the seamstress to raise the legs 2”. So I had the slits button holed in the vest. Attached the armor. Weathered the vest. Temp attached the braids. Fit up the back armor. Fit up the Jetpack Harness and sewed on the white straps. Weathered the spats and painted and weathered the pouches.


E0E7105E-B84B-4264-AB8E-C83C804C7112.jpeg
B556ABEE-6F33-4CAE-885A-A5C8D6CAA5F9.jpeg
70744F9B-B532-4E6E-AC4E-2F9EC2241CBD.jpeg
FA62A779-DA7B-4F90-9C05-15ACC8D505F6.jpeg
 
Got my flight suit back from the seamstress. Did a fit up with the boots and knees. Weathered it up with some flat black and Earth Brown spray paints.
C69AEF92-DDC1-4B27-A3FA-BF24FA5AB2CD.jpeg
A2740F73-8885-412B-ADE5-6D93CFA32997.jpeg
4E7F0D7C-7DEC-43C1-AA58-85ABEE465718.jpeg
 
All right so I made a bunch of adjustments. All is complete so here are some pics of my completed costume for ROTJ SE Promo Fett. These are not submission photos just critique. I am super stoked. Let me know if I need to make any tweaks or adjustments.
9E799E2A-6D53-47CC-9BEF-2D4C7B7CE232.jpeg
FDC471AC-FF3F-4CDF-9E35-B5E836F7C7EA.jpeg
CB437090-8ADE-40C9-9494-089C59255FFE.jpeg
4DE45D0D-EEEE-4245-9344-74E3B448AFDB.jpeg
169B927D-87CD-4DC2-BBD6-071B43369566.jpeg
BCB85C6B-A3C4-4567-9C48-344132E2F1DC.jpeg
31000D0C-3F5A-4A83-8084-F5620698A89E.jpeg
93F0FEEF-FCCE-44E4-9A3A-97C28B44DA5A.jpeg
 
Here’s a few things I noticed from the pics.
1. Weather the gloves a bit more. It’s the lighting too.
2. Raise the ammo belt and lower the girth belt.
3. Finish the white damage paint on the girth belt on the back.
4. Weather the knee armor straps some more. Lighting again.
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top