Mandalorian Warriors AKA Death Watch

[kira47]

After watching the episode I've made up my mind that I want a full costume. After a few days of looking at the screenshots I've made a parts list of what I assume those mandos were wearing.

Helmet - Legacy effectsBoba Helmet(Dent Filled) thanks to Fett 4 Real
Chest, Kidney, Back, Thigh, Hand guards, Arm Guards, Lower Leg, Boots - - from what I see the same as the Mandalorian's.
Shoulders - Im not sure if the Mandalorian's shoulders are symmetrical if they aren't the left one is a match.
Knee - was kinda difficult to see but I think its the same as Boba Fett's
Flight suit and flak jacket - looks similar to the Mandalorian's
Jet pack - modified Boba jet pack. Thanks to MMcFett

Belt -??
Blaster - modified Defense Technologies I 1315 37mm gas gun. Thanks to Spero for this one

Will keep updating this as we get more info.

 

[Spero]

I bought a helmet some time ago from this vendor on Etsy that looks spot on.

Boba Fett Mandalorian Helmet Kit ESB/ROTJ - Etsy Sweden

This Costume Hats & Headpieces item by GrimworksArmory has 349 favorites from Etsy shoppers. Ships from United States. Listed on Apr 4, 2024

www.etsy.com

 

[wyawya]

We should just turn this into a full on research thread!! I think that the Mandalorian's shoulder's could be used for both left and right on this costume. The pouches are also the same as the one's on the Mando's (Dyn Djarin's) belt. It's worthy to note that they all seem to have different white markings denoting rank or something.

 

[kira47]

I think with the development of Din's armor we should be able to branch out to these guys fairly easily. Looking around the forum we might be able to get 80-90% of parts needed.

 

[kira47]

We should just turn this into a full on research thread!! I think that the Mandalorian's shoulder's could be used for both left and right on this costume. The pouches are also the same as the one's on the Mando's (Dyn Djarin's) belt. It's worthy to note that they all seem to have different white markings denoting rank or something.
View attachment 184414View attachment 184415

Thanks for the brighter screenshots! The knee guard seems unique or taken from another mandalore variant.

 

[Spero]

I’ve taken many screen shoots. I’ll post after the New Year.

 

[MMcFett]

The jetpack isn't the same as the arena pack. It's close but the thrusters are more like the Boba ones in the place of the arena ones. Tops are a little different too on the tanks and main body.

 

[Captainlonestar]

If only Jetpacks were real.... Guess I'll have to settle for a paramotor.

 

[Spero]

More pics.

 

[Fett 4 Real]

The helmet is a legacy effects Boba Fett helmet. AKA the sideshow bust (ROTJ) hemet with the dent filled. Look at the turn signals on the two and youll see what I mean.

 

[boba87fett]

for reference

 

[Fett 4 Real]

Ive started with a FPH2 that I filled all damage on and then filled the turnsignals in a bit.

 

[Mythos Fenn]

Awesome stuff guys. Judging by the fact that this flash back takes place during the Clone Wars it will be interesting to see if they explain why the Death Watch flash back Mandos have the same armor as the future post ROTJ Mandos like Din considering all the canon Mandos, including Death Watch, shown in the Clone Wars TV show and Jango Fett, who is also Clone Wars time line, have the traditional style Mando armor

 

[wyawya]

Awesome stuff guys. Judging by the fact that this flash back takes place during the Clone Wars it will be interesting to see if they explain why the Death Watch flash back Mandos have the same armor as the future post ROTJ Mandos like Din considering all the canon Mandos, including Death Watch, shown in the Clone Wars TV show and Jango Fett, who is also Clone Wars time line, have the traditional style Mando armor

I think that in reality is was done for budgetary reasons. However, canon wise, I think it'd be best to say this was some sort of off-shoot of Death Watch that just uses this style of armor, and continues to use it post ROTJ. Just my thoery.

 

[Mythos Fenn]

I think that in reality is was done for budgetary reasons. However, canon wise, I think it'd be best to say this was some sort of off-shoot of Death Watch that just uses this style of armor, and continues to use it post ROTJ. Just my thoery.

That was pretty much was guess as well or some some sort of Spec Ops Death Watch. That being said if the budget hunch is correct, which was my thought also, that's not a good excuse lol I would have made them that style armor for free or super cheap as I am sure others would have as well lol Either that are actually use costumers that have made that armor and use them as volunteers like they did with the 501st members. Such a simple solution cause I would most definitely volunteer my free time to fly out and be an extra lol

 

[Spero]

Any thoughts on the blue color they wear, or overall paint scheme? Would be cool to identify the correct colors.

 

[Spero]

The rifle seem to be a Defense Technologies I 1315 37mm gas gun. Someone needs to recreate an acceptable version of that soon.

 

[Spero]

The rifle seem to be a Defense Technologies I 1315 37mm gas gun. Someone needs to recreate an acceptable version of that soon.

 

[wyawya]

That was pretty much was guess as well or some some sort of Spec Ops Death Watch. That being said if the budget hunch is correct, which was my thought also, that's not a good excuse lol I would have made them that style armor for free or super cheap as I am sure others would have as well lol Either that are actually use costumers that have made that armor and use them as volunteers like they did with the 501st members. Such a simple solution cause I would most definitely volunteer my free time to fly out and be an extra lol

That's definitely true, I'm making an entire set of Boba style armor with sintra for 30 bucks. And I'm sure there's tons of Mercs that would be willing to do that. However they probably just used the molds they already had I guess.

 

[wyawya]

Sergey Kolesnik on Facebook 3D Modeled a version of the blaster. Looks like he'll be making a 3D print as well.