You need one of these. Well, at least I think so. I'll be doing a run of kits for you to build yourself a nice display base for Han. The kit will ship late September, and include: two CNC cut 1/2" thick mdf top panels cut with chamber floor pattern two CNC cut 1/2" thick mdf blank bottom panels four laser cut 1/8" thick hardboard panels cut with stair step pattern a generous 30 foot length of remote controllable color changing led strip tape ac adapter for leds white opaque light diffuser film to back openings The top panels will have pre-drilled holes on theback rectangular section that line up with spots on the bottom of the HiC to allow for easy mounting. Using these mounting holes, it'll be able to support a free-standing HiC if you plan on bringing it to a convention. USA shipping from baltimore in a 48"x24"x4" box. The US price is $265 including shipping. For orders outside of the country, I'll have to figure out the shipping, but just like the HiC box kits, I can have these made in the EU, Canada, and Australia so it might not end up being that bad. likely we'll make the CNC parts near you, and then ship the other parts from baltimore. I'm opening this up to a batch of ten orders, and if this half-fills we'll start production on that batch, and start a new one if needed. I'd like to get started producing, but will be away for three weeks, Aug 25-Sept 16ish. I don't think I'll be able to get these shipped before then, so we're looking at a late September delivery. You can place your pre-order here: lease comment once you've placed your order to help us all keep track I'll be adding more photos and details as I finish the first prototype.