For Sale DVH V4 FETT JETPACK SUMMER SALE! CLOSED!

Darth Voorhees

Well-Known Hunter
CLOSED!
FETT JETPACK SUMMER SALE!


LIMITED SLOTS AVAILABLE, FOR A LIMITED TIME ONLY!!

SALE ENDS MARCH 31st
or when all 8 slots are filled, whichever comes first

Expected shipping will be approx July 2019

COMPLETE SUPER TROOPER - $475 (REG $575)
COMPLETE ESB - $550 (REG $750)
COMPLETE JANGO KAMINO -$600 (REG $800)
COMPLETE ROTJ - $650 (REG $850)
COMPLETE ROTJ SE - $700 (REG $900)

SHIPPING IS NOT INCLUDED IN THE PRICING. SHIPPING COST WILL BE COLLECTED ONCE READY TO SHIP!

These will be the brand new Version 4 DVH kits fully painted and assembled. Kits are fiberglass with resin detail parts and weigh around 7-8 pounds fully built. You will need to purchase the Jetpack hooks for your kits, and/or any metal upgrades you'd like. You can send them to me for installation, or you can install them yourself afterwards. I dont charge any extra to install them for you. i do not do any electrical work, so that will be up to you to install the light kit for the beacon if you choose to get one.

Photos are of the V3 packs...this will be for the newer V4
  • Completely new rocket parts, including the slotted flange
  • Lower profile flanking rectangle areas on the main body (the white sections on the ROTJ)
  • new redone piano keys
  • new fuel tank caps
  • better overall fitting
  • tweaked thruster design
  • screen accurate sized rear hatch
PP: CLOSED!
1 - MTDavis - ESB - PAID
2 - DStep - ROTJ - PAID
3 - Scimitar - ESB - PAID
4 - Lou Battanio - Jango - PAID
5 - Motor Trooper - ESB - PAID
6 - Lidocaine - ROTJ SE - PAID
7 - B.kieffer - SuperTrooper - PAID


Photos are of the V3 kit painted in ESB and ROTJ for reference of the quality of work you will receive.

JP.jpg


IMG_3122.JPG
 
Last edited:

Darth Voorhees

Well-Known Hunter
I do not, as the V3 packs are all gone aside from the 2 im currently painting. The V4 is the same size as the V3, only the details listed in the Original post were updated. The only size difference would be the rocket overall is about 1/2" shorter.

However, This is what i have so far for pics of the V4...these are the Master parts to be molded.

Main Body:
53709934_258208751731291_4335823460166008832_n.jpg

54417748_2039658659667905_5383406042820378624_n (1).jpg

---------------------------------------------------------------------------------------------------------------------------------------------------
Rocket "assembled":
55510751_2201954183245641_971806693694373888_n.jpg

----------------------------------------------------------------------------------------------------------------------------------------------------
Rocket parts and fuel caps:

The Machinecraft collar will fit on this rocket perfectly. I got the measurement of the hole size from Dakota so that it will be a perfect fit with the upper rocket.

Upper rocket fins will be separate pieces for detail.

The black tube is to make the original rocket render/print fit into the updated collar and lower rocket. that piece will be about 1/3rd smaller in the kit. Having this sleeve will make it easier to add a screw into the base if you so desire. I will also include a "slice" of this tube..essentially a "disc" with an inset for a magnet, and another with an inset for a nut, so magnets or a screw and nut can be added to attach the top and bottom halves of the rocket as a couple of options if you dont want to epoxy them together. This helps with breakdown when trooping to save you some space.

The marks you see on the top of the fuel caps are insets countersunk on the tops to put the pour tubes for when i make the molds. that will not be present in the kits, as i will remove the pour spouts for the kits.

54428394_333839997262739_1267474896640802816_n.jpg

---------------------------------------------------------------------------------------------------------------------------------------------------
rocket details:
53913882_1995657444064188_286100579179036672_n.jpg

54514961_813489752364702_4957073106389696512_n.jpg

53333208_294349348130150_5863899882653220864_n.jpg
 
Last edited:

Darth Voorhees

Well-Known Hunter
Thanks MMcFett! It was redesigned by myself and Brian at WCA. (Stormtrooperguy here on TDH) using all the reference we could find. There seems to be a couple of different version of the upper rocket, but we went with the most seen. He did the actual modeling with both his, and my input for the design, and also printed the pieces with a resin printer. As you can see they make flawless pieces. He also redid the fuel caps for me as mine were slightly imperfect because i made them by hand. The printed pieces are more perfect in terms of round.

Lou...going to PMs now!
 

Darth Voorhees

Well-Known Hunter
A little over a week, and 3 slots left!

March 31st is the last day of the sale...or once all slots are filled, whichever comes first!

If ya want em, come get em! lol
 

Darth Voorhees

Well-Known Hunter
Sale ends this Sunday!!

Also DVH will be closed from April 9th -17th as i will be at Celebration Chicago! Hopefully i'll see some of you there!
 

Darth Voorhees

Well-Known Hunter
Got it, thanks Brett!

Sale ends today folks, if anyone else wants in on this deal, today is the day!

Thank you all who got in on this! I will start on all Jetpacks once im back from Celebration!
 

Darth Voorhees

Well-Known Hunter
For general/basic updates on orders i will be posting them in my FB group, and also in this thread:

Check these before contacting me for updates. You can of course contact me if you want/need more detailed info on your particular order :)
thanks Hunters!
 
Top