psych0ticmisfit
Active Hunter
I decided to try 3D printing a helmet. I searched all over for one that was modeled with 3D printing in mind. One that was cut up and ready to go but I couldn’t find anything that was good looking. Then I found RafalFett’s model. it wasn’t cut up into multiple pieces like I had hoped but I was able to get it cut up by using fusion360.
I would like to thank RafalFett for the great file. I am still printing out pieces but I thought I’d show my progress so far.
The front right of the dome needs to be re-printed. Not sure how but the layers shifted on me and you’ll see a slight line across it.
I have it taped together for a test fit. Front left visor still has the support material in place. Once I get everything printed I’ll start glueing it. Then I’ll apply the smooth on xtc.
I would like to thank RafalFett for the great file. I am still printing out pieces but I thought I’d show my progress so far.
The front right of the dome needs to be re-printed. Not sure how but the layers shifted on me and you’ll see a slight line across it.
I have it taped together for a test fit. Front left visor still has the support material in place. Once I get everything printed I’ll start glueing it. Then I’ll apply the smooth on xtc.