Judge Valcar = 2000ad Crossover Project

Well here is how the Shoulders are starting to take shape. Im using a base section that is 3mm, They are not shaped at this time. Here is the progress with them....

shoulders 02.jpg


P04-15-07_10.24.jpg
 
These are the 10mm thick Bars that will be applied to the base sections. I now have cut them all out and will be soon attaching them to the base...

P04-15-07_10.26.jpg


P04-15-07_10.25.jpg
 
In this next post I have done a rough mock up of how they will look, not completed tho, but just a test more than anything.... The both sections will be folded over both shoulders and attached to the chest plates and back plate.....

P04-15-07_10.27.jpg


P04-15-07_10.27[1].jpg
 
You did bring a smile to me face BigJon, the funny thing was I had been working on this project to about 2 weeks before starting this thread. I'm at a slow point at this mo, I need to get hold of my primers and the Gold spray for the bars and so on... Im also awaiting my armour to arrive so i can start work on that. But it's a good thing to take time out for a short while, what with this weekends Collectormaina 11, that my Sniper Mando will be making it's first outing.. Its going to be fun. I will however get his Judge project finished before the big Star Wars event in london this July.. Both outfit will be worn that weekend....
 
I have now finished my Judge Helmet (Apart from the stork and Rangefinder). I have cut down a visor and stuck a silver motor bike floppy visor over the top and cut to shape. The Visor has been hot glued into place. I have also added a finishing touch also to the look. I have added a small nose guard to complete the look..... Here is how it has turned out...

Helmet Finished With Nose section.jpg
 
Last edited by a moderator:
Just a quick word to say that I will be updating this topic, I have taken a week out to relax from the project, plus I was trooping with Shadow UK over the weekend at Collectormania 11. And now the weather outside is unfit to be spraying anything.... rain rain thats all we have had this week.... anyhow more updates to follow very soon.....
 
I have now got myself some Riding boots that im going to use with my Judge outfit. They were a little tight around the shin. So i have had to cut a slit into the front of them to be able to pull them on over my large shin. Thats not a problem, They have turn out just how I wanted them to.. Here's how they look on.....

Imag0001.jpg


Imag0002.jpg


Imag0003.jpg
 
Valcar, just don't get anymore of those riding jophurs, like the ones you used to wear when we used to dress-up as Klingons... seeing you in those still gives me nightmares..! LOL:wacko
 
Trust me I don't plan to Shadow UK. Today has been another rainy day so it was time to do something with the outfit. So I went do to my local Hobby craft and bought some Gold ribon and some all purpose extra strong adhesive. The plan was to complete the finishing on my Judge Arm and Leg body armour.... Here is a pic of the items used...

Materials Used.jpg
 
Well back to work on my Judge, Today I have finished the Helmet. I was going to have the rangefinder Gold. After some tests to see how it would look, I in the end went with the Blue like the Helmet, and did the stork in silver... Here is how it turned out....the flash has given it the outdoor look. Inside the Blue and the Red show darker....

Helmet Face.jpg


Helmet Back.jpg


Helmet left.jpg


Helmet right.jpg
 
Today I have done some more work on my Judge. I have now been working on the shoulder plates. I have used glue to hold the bars inplace. The I have drilled out one hole in each bar at each end. I have now used nuts and bolts to hold them in place... here is the Shoulder a shoulder plate just after being drilled............

Shoulder Plates With Dril holes.jpg
 
After doing the same to the other shoulder plate I have fixed the nuts and bolts into both plates... below is some progress shots of how it looks top and bottom.... Im going to cover the underside nuts to avoid any rubbing...

Shoulder Plates With Bolts.jpg


Shoulder Plates Underside, with nuts.jpg
 
This thread is more than 16 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top