Yolo

Here are some Boba helmet makers
1) animefan 2) BobaMaker 3) Darth Voorhees
Hope this helps
 
Last edited by a moderator:
Once upon a time from RS props helmet I never received. I do not advise. I waited 7 months. I canceled the order.
Bobamaker is very good, but will have to wait a very long time.
Asok died, isn't it? Who now makes his helmet's - dark history. I am very proud that in my collection I have his helmet, but I received it through the 501 Legion.
Animefan is the best option. You'll get his helmet faster than the others.
You can try to place an order with Fettprides.


While I was waiting for orders, I made my helmet by myself) You can try, there are many tutorials with creating a helmet from scratch.
 
Are all the helmet going to be about the same size? I'm not a very big guy and don't want to spend all this time and I end up looking like a bobble head
 
Nope,
Where that there was a topic with sizes, I found and kept them for myself:

superjedi said:
Here are those measurements.
The height was taken with the helmet sitting on a flat surface, and is measured to the top of the dome.
The width does not include the ears.
The depth is from the back of the helmet to the outer surface of the visor.

BM
W = 9 3/8" = 238mm
D = 10 1/4" = 260mm
H = 9 15/16" = 252mm

GMH
W = 9 1/8" = 232mm
D = 10 3/8" = 263mm
H = 9 3/4" = 247mm

FPH
W = 10 1/8" = 257mm
D = 10 1/4" = 260mm
H = 10 1/8" = 257mm

TF
W = 9 5/8" = 244mm
D = 10 1/16" = 255mm
H = 10" = 254mm

MSH2
W = 9 15/16" = 252mm
D = 10" = 254mm
H = 10 1/4" = 260mm
Click to expand...
 
This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top