Esb barrel help

Froflo

Hunter
So i purchased a half decent esb ee-3 kit off ebay basically everything behind the barrel is good but the barrel section suplied was just a straight pipe i have a real flash tube i wanted to put in the end of it but i need the correct tapered main barrel to do so does anyone have any suggestions please?!
Basically I need a tapered barrel and new clamps to mount the scope onto

- - - Updated - - -

My apologies for the sideways photo not sure why that happened

image.jpg
 
Are you looking for measurements of the length of the barrel and the flash tube? If so I can take a few picture of mine if that helps. Obviously, the tube supplied is too long for the barrel, so it needs to be cut


So i purchased a half decent esb ee-3 kit off ebay basically everything behind the barrel is good but the barrel section suplied was just a straight pipe i have a real flash tube i wanted to put in the end of it but i need the correct tapered main barrel to do so does anyone have any suggestions please?!
Basically I need a tapered barrel and new clamps to mount the scope onto

- - - Updated - - -

My apologies for the sideways photo not sure why that happened
 
Are you looking for measurements of the length of the barrel and the flash tube? If so I can take a few picture of mine if that helps. Obviously, the tube supplied is too long for the barrel, so it needs to be cut
I would definetly apreciate that i need to know how long the tapered section is i believe the flash tube should stick out 4 and a half inches or so but also im wondering what i can use for the tapered section or if anyone knows any vendors who would sell me just that part

- - - Updated - - -

The tube supplied is useless its straight the whole way so even if i cut it there would to be know way to put the flash tube in it without making it look ridiculous
 
c2e4a72adcaaf1df8fcadb33893dc196.jpg
aa66d337b4bb1eefadded645f503832b.jpg


My suggestion is find a pvc pipe that the flash tube circumference can fit snug into and use that as your barrel. If not, you might have to find a 3D vender who can do it.


Sent from my iPhone
 
But then i wouldnt be able to fot it onto the gun :( , Ive tried messaging a few different vendors but none seem to have interest in selling only the barrel,
 
Honestly id prefer to find just the tube section but if it comesdown to it id take the whole section with the breech

yeah it makes more sense to cast the entire barrel/breech piece than just the barrel. TA has a great recommendation with the PVC pipe. the taper of the webley barrel is pretty minimal, would certainly save you some $. if you do want the replica part though, let me know. i'll see what i can do, i know a guy [emoji6]


Sent from my iPhone
 
yeah it makes more sense to cast the entire barrel/breech piece than just the barrel. TA has a great recommendation with the PVC pipe. the taper of the webley barrel is pretty minimal, would certainly save you some $. if you do want the replica part though, let me know. i'll see what i can do, i know a guy [emoji6]


Sent from my iPhone
thanks man that would be awesome! Please do let me know :)
 
You could simply buy a piece of chrome tubing and drill the holes yourself using the templates posted up by Seven on this forum a few years ago. I calculated that the tube protrudes from the barrel by 4.75" or 120mm. That length includes the section that is obscured by the front barrel mount. It's in the thread someone linked above. This thread has Seven's templates attached.

http://www.thedentedhelmet.com/f20/mpp-vs-heiland-30238/
 
You could simply buy a piece of chrome tubing and drill the holes yourself using the templates posted up by Seven on this forum a few years ago. I calculated that the tube protrudes from the barrel by 4.75" or 120mm. That length includes the section that is obscured by the front barrel mount. It's in the thread someone linked above. This thread has Seven's templates attached.

http://www.thedentedhelmet.com/f20/mpp-vs-heiland-30238/
no i have the flash tube/ chrome part im talking about the tapered section the flashtube/chrome part fits into
 
My misunderstanding. Replacing that will be tough. Is it not possible to return the kit?
Unfortunately not, i paid very litle for it though so im not too worried about it, it looks like jbdubz is gonna get me hooked up with the storm rider pieces i need to make this work any how :) so it all works out , thanks for that link anyway though man! Definetly still handy have!
 
This thread is more than 7 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top