Zam\'s chain

  • Thread starter Migrate from As You Wish
  • Start date
M

Migrate from As You Wish

Guest
Ok I am curious what others have used for the beads that is tied off to one side of Zams belt area. I can tell they are two styles and I am pretty sure they are Hemitite. I got a smaple of what I think they are, but wish to consult with those who have come before me.
 
Last edited by a moderator:
mardi gra beads they throw them out for free at the new orleans casino here, well thats what they look like to me anyways.


-Bear
 
Last edited by a moderator:
I used mardi gras beads and spray painted them the color I wanted.

:zam Kim
 
Last edited by a moderator:
They look bigger to me. and it almost looks like there's another smaller (tube shaped) bead in between each round one:
vd3.jpg


Oh, if only i could find a way to get to Australia this september :(
 
Last edited by a moderator:
I like the idea of useing Mardi Gras beads, but I am convienced the beads are about that size for the larger one. the smaller one is almost a tube shape, but I am more tempted to say it is a rounded tube. I am still planning to go with Hematite for the beads and create the strands myself.
 
Last edited by a moderator:
Try Hot Topic. I think they have beads like that. They are a large dog-tag style chain.

Hope someone finds this helpful.
 
Last edited by a moderator:
Yeah, like moviebuff said, they have beads like that on necklaces I've seen. I actually just saw some at KaoZ ( Local tattoo shop ) it was a necklace, and they have connectors. Also, if you have a Spencers gifts around, try them, they usually have them. Buy three or four, and connect them, they should be long enough.
 
Last edited by a moderator:
A very stupid question here: What is Mardi Gras? :confused

I've found some of those chain with spheric balls/beads at the local DIY Shop but the biggest is about 3-4mm dimeter (the ones on my pager is about 2mm). And I thought of using sliver painted plastic beads (spheric & tube) but that might not give the weight needed for those chain.

I assume the real one should be about >5mm diameter. How?
 
Last edited by a moderator:
Well I am currently stranding my own toughter useing 10mm Hemalyke beads and 8x4mm Hemalyke tubes. These are a actualy stone or metal type of bead that are the cloest thing I have found to the actualy color of the bead. Because of what they are made from theydo weigh a good bit when about 30 of the 10 mm and 30 of the 8x4mm beads are strung up, but I actually think these will suffice for what I am doing. I will try and get a picture posted of them soon.
 
Last edited by a moderator:
Mardi Gras = Fat Tuesday. It all started here in Mobile, Alabama. Not New Orleans as most think. I'm sure it has a deeper meaning, but we just get on big floats and throw stuff at people. Basically. Others, feel free to add.
 
Last edited by a moderator:
Well, I had hoped that I would have gotten new ideas about the beads. Mardi Gras beads were what was suggested to me as well. I know that MG beads come in different sizes/colors.
But if there are cylinder shaped beads, it would probably be easiest to make your own out of the color you want.
I also thought that her beads may be "pop" beads, but I am not sure how much flexibility that would give. Are the majority of you making your own out of the cylinder and round beads?
 
Last edited by a moderator:
these are available at places like Hot Topic... they are those metal bead necklaces - like the bank pen chain - but bigger.... mardi beads are WAY too small and cheap and not so flexible.
 
Last edited by a moderator:
I just found some darker colored ones at spencer gifts.Uhg..$30 for three necklaces to equal 75 beads. I don't know if they should be lighter or darker. Some pics have them as a lighter silver bead, and some have it as a darker bead but still mettalic.
 
Last edited by a moderator:
Check ACE Hardware. I saw some beads that might fit the bill and they are on a giant spool. You can buy as much or as little as you need and it will be cheaper than Hot Topic or Gadzooks or anywhere in a mall.

Wes
 
Last edited by a moderator:
Dallas,

Darker mettalic or silver? I have the feeling if it's ACE, then we will have a problem with finding the darker mettalic, cause hardware stores usually only carry one color methinks, but I could be totally wrong. I know they have chains for like pulley lights, but the size of the bead matters, and the beads are pretty big like 9mm. So, you sure?
 
Last edited by a moderator:
hard to say... they looked dark at MOM - but some pix they look silver. i was just going to use my silver ones and give them a light dusting of bronze spray paint - just to dull them a bit but still be shiney.
 
Last edited by a moderator:

Zam I Am wrote:

Dallas,

Darker mettalic or silver? I have the feeling if it's ACE, then we will have a problem with finding the darker mettalic, cause hardware stores usually only carry one color methinks, but I could be totally wrong. I know they have chains for like pulley lights, but the size of the bead matters, and the beads are pretty big like 9mm. So, you sure?

They were pretty good size, so it's a safe bet. I'll be back up in Tucson in a week or so and I'll try to get an exact size.
 
Last edited by a moderator:

ZamWessel~ wrote:

I went up to hot topic yesterday, and found beads for 8.99 a piece.
could they work?
ZW~ :zam

Actually, I stopped there too, and they were cheaper, but only by a buck each necklace. Yeah, they do work, but you have to get the right sized ones. There are some that are HUGE and some that are too small and some that are just right. The only problem is the connection of all three necklaces shows the visible, large clasp. I wish it could be just one strand of 9mm diameter chained beads. That would be exact. That's why I questioned the ACE ones, Cause, it's almost impossible to solder the necklaces together. The reason I went to spencers and purchased three necklaces from there, is cause they already had a darker mettalic finish. But different pics show different colors. MOM pics show a bit darker beads, and some studio shots make the beads look really silver.
 
Last edited by a moderator:
This thread is more than 20 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top